EnGenius EAP1750H Manual do Utilizador descarregar pdf (Página 46)

Management VLAN Settings

This page allows you to assign a VLAN tag to the packets. A

VLAN is a group of computers on a network whose software

hasbeenconguredsothattheybehaveasiftheywereon

a separate Local Area Network (LAN). Computers on VLAN

donothavetobephysicallylocatednexttooneanother

on the LAN.

TocongureVLANtags,youmustrstisolateandentera

VID before enabling a VLAN under the Management VLAN

ID.

Note: Only applicable in Access Point and WDS AP mode.

Prole Isolation:Restrictclientsfromcommunicatingwith

different VIDs by checking the IsolationboxfortheSSID

you wish to select under the Wireless Settings funtion.

VLAN ID (VID): SpeciestheVLANtagforeachprole.

Management VLAN ID: If your network includes VLANs,

you can specify a VLAN ID for packets pass through the

Access Point with a tag. Otherwise, select No VLAN Tag.

Save: Click Savetoconrmthechanges.

Note:

If you recongure the Management VLAN ID, you may lose

your connection to the EAP1750H. Verify that the DHCP server

supports the recongured VLAN ID, then reconnect to the

EAP1750H using the new IP address.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 63 64

Sem comentários

EnGenius EAP1750H Manual do Utilizador Página 46