EnGenius ENH200EXT Manual do Utilizador

LONG RANGE WIRELESS ACCESS POINT / CLIENT BRIDGE Model: ENH200EXT User Manual Version: 2.0

1.6 Understanding the ENH200EXT LEDs The rear of the ENH200EXT has two groups of LEDs. One group, labeled INDICATORS, shows the status of the device.

1.7 Hardware installation diagram: 2 Wireless Network Modes 2.1 Access Point Mode In the Access Point Mode, the ENH200EXT functions like a central

2.2 Access Point with WDS Function Mode The ENH200EXT also supports WDS functionality while in Access Point Mode. Simply configure other Access Poin

to scan all of the Access Points within range and configure its SSID and Security Password to associate with it. You can also connect your station to

WDS Bridge Mode is unlike Access Point Mode. APs linked by WDS are using the same wireless channel, and connecting excessive numbers of APs on the

3 Configuring Your Computer for TCP/IP This chapter describes how to configure the TCP/IP settings on a computer that will be used to configure the E

4. In the properties dialog box, click Use the following IP address: to configure your computer for Static TCP/IP. Enter an IP address (i.e. 192.1

3.2 Configuring Microsoft Windows Vista Use the following procedure to configure a computer running Microsoft Windows Vista with the default Windows i

6. In the properties dialog box, click Use the following IP address: to configure your computer for Static TCP/IP. Enter an IP address (i.e. 192.168

Table of Contents 1 PRODUCT OVERVIEW ...

3.3 Configuring Microsoft Windows XP Use the following procedure to configure a computer running Microsoft Windows XP with the default Windows interfa

3.4 Configuring Apple Mac OS X The following procedure describes how to configure TCP/IP on an Apple Macintosh running Mac OS 10.2 or later. Note: Th

3.5 Logging into the ENH200EXT After completing the TCP/IP settings from the beginning of the Chapter, you can now access the web-based configuration

4 Status The Status section is on the navigation drop-down menu. Selecting it, you will then see three options: Main, Wireless Client List, and System

4.2 Main Click on the Main link under the Status drop-down menu or click Home from the top-right of the webpage. The status that is displayed correspo

4.3 Wireless Client List Click on the Wireless Client List link under the Status drop-down menu. This page displays the list of Clients that are assoc

4.5 Connection Status Click on the Connection Status link under the Status drop-down menu. This page displays the current status of the network, inclu

5 System 5.1 Switching the Operation Mode The ENH200EXT supports 4 modes: Access Point, Client Bridge, WDS Bridge, and Client Router. In order to swit

6 Wireless Configuration This section will guide you through all of the wireless settings. Please read the instructions carefully. Inappropriate setti

Wireless Mode The wireless mode supports 802.11b/g/n mixed operation. It is compatible with the most common wireless bands. Channel HT Mode The defa

6.2 WIRELESS SECURITY SETTINGS ...

SSID Specify the SSID for current profile. VLAN ID Specify the VLAN tag for current profile. Suppressed SSID Place a check to hide the SSID. Cl

6.1.2 Client Bridge Mode Wireless Mode The wireless mode supports 802.11b/g/n mixed operation. It is compatible with the most common known wireless

Profile After Site Survey, the webpage will display all of the nearby Access Points. Click the BSSID if you would like to connect with it. Wireless

6.1.3 WDS Bridge Mode Wireless Mode The wireless mode supports 802.11b/g/n mixed modes. It is compatible with the most common wireless bands. Channe

MAC Address Enter the Access Point’s MAC address that you would like to extend the wireless coverage of into the MAC address filter. Mode Select Di

6.1.4 Client Router Mode Wireless Mode The wireless mode supports 802.11b/g/n mixed operation. It is compatible with the most common wireless bands.

Profile After Site Survey, the webpage will display all nearby Access Points. Click the BSSID if you would like to connect with an AP. Wireless Secu

6.2 Wireless Security Settings Wireless Security Settings section will guide you through the Security configurations: WEP, WPA-PSK, WPA2-PSK, WPA-PSK

6.2.2 WPA-PSK Security Mode Select WPA-PSK from the drop down list. Encryption Select Both, TKIP or AES for encryption type. Passphrase Specify th

6.2.3 WPA2-PSK Security Mode Select WPA2-PSK from the drop down list. Encryption Select Both, TKIP or AES for encryption type. Passphrase Specify

APPENDIX A – TROUBLESHOOTING ...

6.2.4 WPA-PSK Mixed Security Mode Select WPA-PSK Mixed from the drop down list. Encryption Select Both, TKIP or AES for encryption type. Passphrase

6.2.5 WPA Security Mode Select WPA from the drop down list. Encryption Select Both, TKIP or AES for Encryption type. Radius Server Specify Radius

6.2.6 WPA2 Security Mode Select WPA2 from the drop down list. Encryption Select Both, TKIP or AES for encryption type. Radius Server Specify Radiu

6.2.7 WPA Mixed Security Mode Select WPA Mixed from the drop down list. Encryption Select Both, TKIP or AES for encryption type. Radius Server Sp

6.3 Wireless Advanced Settings Data Rate Select Data Rate from the drop down list. Data rate will affect the efficiency of the throughput. A lower d

Aggregation Aggregation is to merge the typical size of data’s header to one data. It is useful for the small size but more packets. Wireless Traffic

6.4 Wireless MAC Filter Wireless MAC Filter is used to Allow or Deny wireless clients, by their MAC addresses, from accessing the network. You can ma

6.5 WDS Link Settings WDS Link Settings is used to establish a connection between Access Points without forgoing Access Point functionality. APs with

7 LAN Setup This section will guide you to setup the Local Area Network (LAN) settings 7.1 IP Settings This section is only available for Non-Router M

7.2 Spanning Tree Settings Spanning Tree Status Select the Radio button to On or Off to toggle the Spanning Tree function. Bridge Hello Time Specif

About This Document This document is written by EnGenius Inc. EnGenius Inc. the reserves the right to change this document without notice and all rig

8 Router Settings This section is only available for AP Router Mode and Client Router Mode. 8.1 WAN Settings There are four different types of WAN con

Internet Connection Type Select Static IP to begin configuration of the Static IP connection. Account Name Specify Account Name that is provided by I

8.1.2 DHCP (Dynamic IP) Select DHCP as your WAN connection type to obtain the IP address automatically. You will need to enter Account Name as your ho

Use These DNS Servers Select the Radio button to setup the Primary DNS and Secondary DNS servers manually. Discard Ping on WAN Place a check to Enab

8.1.3 PPPoE (Point-to-Point Protocol over Ethernet) Select PPPoE as your WAN connection type if your ISP provides a Username and Password. If the PPPo

Connect on Demand Select the Radio button to specify the maximum idle time. The Internet will disconnect when it reaches the maximum idle time; howev

8.1.4 PPTP (Point-to-Point Tunneling Protocol) Select PPTP as your WAN connection type if your ISP provides information regarding: IP Address, Subnet

Internet Connection Type Select PPTP to begin configuration of the PPTP connection. MTU Specify the Maximum Transmit Unit size. EnGenius recommends t

8.2 LAN Settings (Router Mode) IP Address Specify LAN port IP address. IP Subnet Mask Specify LAN IP Subnet Mask. WINS Server IP Specify WINS Serv

8.3 VPN Pass Through VPN Pass Through is used to allow certain protocols to be tunneled through an IP network such as PPTP and L2TP, or to implement a

1 Product Overview Thank you for using the ENH200EXT. It is a powerful and enhanced, enterprise-scale product with 4 multi-functions: Access Point, C

8.4 Port Forwarding Port Forwarding is used to allow public services such as Web Server, Mail Server, or FTP server to be set up. For example: Set up

8.5 DMZ Enabling DMZ will expose the computer which is in the DMZ to the Internet. This feature may be used in scenarios such as Internet Gaming or V

9 Management Settings The Management section is on the navigation drop-down menu. You will see seven options: Administration, Management VLAN, SNMP Se

Port if you specify the Port number is 8080, then you will need to enter the following http://IP address:8080 to access the web interface. Save / App

9.3 SNMP Settings Click on the SNMP Settings link under the Management menu. This is a networking management protocol used to monitor network-attached

9.4 Backup/Restore Settings Click on the Backup/Restore Setting link under the Management menu. This option is used to save the current settings of th

9.6 Time Settings Click on the Time Settings link under the Management menu. This page allows you to configure the time on the device. You may do this

9.7 Log Click on the Log link under the Management menu. This page displays a list of events that are triggered on the Ethernet and Wireless interface

9.8 Diagnostics Click on the Diagnostics link under the Management menu. This function allows you to detect connection quality and trace the routing t

10 Network Configuration Example This chapter describes the role of the ENH200EXT with 4 modes. The Access Point mode’s default configuration is a cen

c) The ability to access real-time information Doctors and nurses, point-of-sale employees, and warehouse workers can access real-time information wh

10.2 Client Bridge Mode Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP Router to join the network.

10.3 WDS Bridge Mode Use this feature to link multiple APs together in a network. All clients associated with any of the APs can communicate with each

10.4 Client Router Mode In the Client Router Mode, the ENH200EXT has a DHCP Server that allows multiple devices to share the same Internet connection.

Appendix A – Troubleshooting This appendix provides problem-solving information you may find useful in case you need to troubleshoot your ENH200EXT.

Question Answer I want to buy a high-gain antenna for the ENH200EXT, but I don’t know what type of antenna and RF connector to buy. Use a pig tail ca

Appendix B – Specifications Standard: IEEE 802.11 b/g/n Physical Interface: - 1 x Port with PoE support - 1 x Reset Max. Data rate: 150 Mbps LED

802.11g(2.412 ~ 2.472GHz) 6Mbps: 26 -96 9Mbps: 26 -93 12Mbps: 26 -89 18Mbps: 26 -85 24Mbps: 25 -81 36Mbps: 24 -79 48Mbps: 23 -76 54Mbps:

Appendix C – Glossary Access Point A base station in a WLAN that act as a central transmitter and receiver of WLAN radio signals. Ad Hoc Network A

Coverage Area The geographical area that can be served by a mobile communications network or system. Coverage Hole An area within the radio coverage f

HT mode In the 802.11n system, two new formats, called High Throughput (HT), are defined for the Physical Layer, Mixed Mode, and Green Field. If a sys

1.2 Benefits Access Point Mode Use this feature to setup the access point’s configuration information. It supports transmit power and channel adjust

management for computers to connect and use a network service. Because of its broad support and ubiquitous nature, the RADIUS protocol is often used b

WPA -Pre-Shared Key (WPA-PSK) WPA-PSK requires a single (identical) password entered into each Access Point, wireless gateway, and wireless client. A

Appendix D – Statements of Conformity D.1 – Federal Communication Commission Interference Statement This equipment has been tested and found to comply

D.2 – Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

D.3 – Europe Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test m

0560 Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními

Slovensko [Slovenian] [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1

1.3 Package Contents Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials;