EnGenius ESR-1221 EXT Manual do Utilizador descarregar pdf (Página 23)

WAN Settings – Static IP

 Click on the WAN link on the navigation drop-down menu. This feature allows you to

configure the WAN interface using a static IP address, DHCP Client, PPoE, or PPTP.

 WAN Access Type: Select Static IP from the drop-down list. This type of connection

is used when your ISP has provided you a dedicated IP address.

 IP Address: Enter an IP address for this device, which is assigned by your ISP.

 Subnet Mask: Enter the subnet mask for this IP address, which is assigned by your

ISP.

 Default Gateway: Enter the IP address of the default gateway, which is assigned by

your ISP.

 MTU: You may adjust the Maximum Transmit Unit (MTU), however it is recommend

that this value is set to the default: 1500 bytes

 DNS 1-3: Specify the IP address of the DNS server

 Clone MAC Address: Specify a MAC address if you would like to use a different

MAC address on this device. (optional)

 Enable uPNP: Place a check in this box to enable UPnP. It is recommended to

enable this feature as it’s used by several applications.

 Enable PING Access on WAN: Place a check in this box if you would like the device

to be pinged from the WAN side (ISP).

 Enable Web Sever Access on WAN: Place a check in this box if the static IP

address if used for a web-server.

 Enable IPsec pass through on VPN connection: Place a check in this box to

enable the pass through of IPsec packets on a VPN connection.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 46 47

Sem comentários

EnGenius ESR-1221 EXT Manual do Utilizador Página 23