EnGenius ENH200EXT Manual do Utilizador descarregar pdf (Página 72)

10.4 Client Router Mode

In the Client Router Mode, the ENH200EXT has a DHCP Server that allows multiple devices to

share the same Internet connection. Connect to an AP/WISP wirelessly and connect to LANs

via wired. Client Router Mode is functionally opposite to the AP Router Mode.

Please refer to the last section to check Access point’s configuration.

Client Router

Step 1 Login to the web-based configuration interface with default IP

192.168.1.1

Step 2 Select your country or region’s regulation.

Step 3 Select Operation Mode to Client Router from System

Properties.

Step 4 Change your Local Area Network setting to Obtain an IP

Address Automatically.

Step 5 Use site survey to scan channels of the nearby area.

Step 6 Select the AP that you would like to associate with.

Step 7

Setup the authentication settings that match the Access Point’s

settings.

Step 8 Configure your WAN connection type which is given by your

Internet Service Provider on the WAN Settings.

Step 9 Press Apply to process all of the configurations.

The Client Router’s IP settings must match those of the Access Point’s.

ENH200EXT

AP / WISP

192.168.1.1

192.168.1.10

192.168.1.11

192.168.1.12

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 85 86

Sem comentários

EnGenius ENH200EXT Manual do Utilizador Página 72