EnGenius ENH900EXT Manual do Utilizador descarregar pdf (Página 52)

SNMP Settings

This page allows you to assign the Contact Details, Location,

Community Name, and Trap Settings for a Simple Network

Management Protocol (SNMP). SNMP is a networking

management protocol used to monitor network attached

devices. SNMP allows messages (called protocol data units)

tobesenttovariouspartsofthenetwork.Uponreceiving

these messages, SNMP compatible devices (called agents)

returns the data stored in their Management Information

Bases.

SNMP Enable/Disable: Enables or disables the SNMP

feature.

Contact: Speciesthecontactdetailsofthedevice.

Location: Speciesthelocationofthedevice.

Community Name (Read Only): Speciesthepassword

for the SNMP community for read only access.

Community Name (Read/Write):Speciesthepassword

for the SNMP community with read/write access.

Trap Destination Address:SpeciestheIPaddressofthe

computer that will receive the SNMP traps.

Trap Destination Community Name: Speciesthe

password for the SNMP trap community.

SNMPv3: Enables or disables the SNMPv3 feature.

User Name:SpeciestheusernameforSNMPv3.

Auth Protocol: Selects the authentication protocol type:

MDS or SHA.

Auth Key: Speciestheauthenticationkey.

Priv Protocol: Selects the privacy protocol type: DES.

Priv Key: Speciestheprivacykeyforprivacy.

Engine ID: SpeciestheengineIDforSNMPv3.

Apply Save: Click Apply Save to apply the changes.

Advanced Settings

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Sem comentários

EnGenius ENH900EXT Manual do Utilizador Página 52